REDARC RedVision · Vehicle Management
Run Your Whole Rig From One Screen
REDARC's RedVision Total Vehicle Management System puts your power, lighting, water and appliances under one simple control — on an in-vehicle display or your phone. We design and install it, wired into your rig properly, at our Christchurch workshop.
Start Here
One System for Everything On Board
Modern RVs are full of gear — lights, a fridge, water pumps, an inverter, a TV, electric steps, tanks to keep an eye on. Managing all of it with separate switches and gauges gets messy fast.
A Total Vehicle Management System (TVMS) — REDARC calls theirs RedVision — brings the lot together. From a single mounted display, or the app on your phone, you control and monitor everything in one place, with a clean, easy-to-read interface. It's the difference between a rig full of switches and a rig you run with a fingertip.
Control
- Turn lights on and off — and dim them
- Switch the inverter, fridge and TV
- Run water pumps and electric steps
- Set timers and automate on-board devices
Monitor
- Battery power — what you're using and storing
- Water tank levels across multiple tanks
- Temperatures around your rig
- Your whole system at a glance, live
Display or App
Control at Your Fingertips
RedVision gives you two ways to run your rig: a robust, in-vehicle touchscreen display built to handle the conditions, and a Bluetooth smartphone app so you can check and switch things from wherever you are.
- Clear, modern interface — an easy-to-read layout anyone can use.
- In-vehicle display — mounted where you want it, tough enough for the road.
- Phone app (iOS & Android) — Bluetooth control and monitoring from your device.
- Full battery data — when paired with a REDARC Manager, see charge, usage and storage.
The Range
Which RedVision System?
RedVision comes in a few forms depending on how much you're running and how many tanks you're tracking. We'll match the right one to your rig.
Compact
TVMS Rogue
Slim and flexible — a centralised control solution ideal for lighting and lower-powered devices in vans, campers and smaller setups.
Good for
- 10 dimmable outputs for lights & devices
- Automating lighting with timers
- Up to two water tanks
- Compact builds, tight on space
Full Power
TVMS Prime
The full distribution system for bigger setups — a mix of low and high-powered devices and more than two water tanks. Often paired with a Manager30.
Good for
- More than two water tanks
- A mix of low and high-power loads
- Camper trailers & mid-sized caravans
- Full battery management integration
The Ultimate
TVMS Combo
The smarts of the Rogue and the power of the Prime together — REDARC's most complete off-grid control and monitoring solution.
Good for
- Large, fully-featured builds
- Maximum control and automation
- Serious off-grid and full-time rigs
- Everything, in one system
REDARC recommends installation by a qualified technician. Model names, availability and specifications
are current REDARC information and may change — we'll confirm the right current system for your
build when you enquire.
The Complete Picture
The Brain of Your Power System
RedVision is the control layer that sits on top of your power gear — it works best as part of a complete REDARC system.
Pairs With Battery Management
Connect a REDARC Manager and RedVision shows full battery charge, usage and storage data live.
Works With Your Charging
The distribution box takes inputs from your charging gear like the BCDC, tying charging and control together.
Upgrade Path
Already have a Manager30? A TVMS Prime distribution box can add full RedVision control to your existing system.
Designed as One System
We plan power, charging and control together so it all works seamlessly — not bolted together piece by piece.
Why the Install Matters
A VMS Is Only as Good as Its Wiring
Of everything REDARC makes, a vehicle management system is the most involved to install — it wires into your lights, pumps, tanks, inverter and every accessory you want to control. Done well, it's seamless and a joy to use. Done poorly, it's a tangle of faults. This is very much a job for a workshop that does it properly: we plan the layout, wire it to standard, configure the display and app, and hand it over set up and explained, so you actually know how to use your own rig.
Take Control of Your Rig
Tell us what you'd like to control and monitor, and how you travel. We'll design and install the right REDARC RedVision system for your setup — honest advice, no obligation.
Book a Consultation